binder 7/8" KABELSTECKER 8-10MM

product number: 99 2441 21 03

  • Manufacturer: binder
Picture may vary

Description:
7/8" Male cable connector, Contacts: 2+PE, 8.0-10.0 mm, unshielded, screw clamp, IP67, UL, VDE
From 1 pieces per EUR 14,08
From 20 pieces per EUR 12,32
From 40 pieces per EUR 10,91
From 100 pieces per EUR 9,86
in stock: 0 pieces
Single price: EUR 9,86 - EUR 14,08 per pieces
Total price:

EUR 9,86 - EUR 14,08

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 820
Area (short) 7/8"
Connector design Male cable connector
Connector locking system screw
Mounting type Cable mounting
Bereich Automation Technology - Voltage and Power Supply
Termination screw clamp

Electrical parameters

Rated voltage (V) 300 V (600 V UL)
Rated current (40 °C) 12.0 A
Insulation resistance ≥ 1010 Ω
Contact resistance ≤ 5 mΩ
Insulating material group III
Overvoltage category III
Pollution degree 3
EMC compliance unshielded

Material characteristics

Housing material PBT
Contact material CuZn (brass) / CuSn (bronze)
Contact body material PUR/PA
Locking material Zinc die-cast nickel-plated
RoHS value (Pb)
RoHS description Blei
SCIP number f842e581-2de8-4778-8048-a3581ca3585e
SVHC description Lead
SVHC value CAS 7439-92-1

Technical characteristics

Cable outlet 8.0-10.0 mm
Cross-sectional area (AWG) AWG 16
Cross-sectional area (mm) max. 1.50 mm²
Degree of protection IP67

Other

Approval 1 UL
Approval 2 VDE
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th
Security notice 8 To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
customs tariff number 85369010
Aliases 9924412103
99.2441.21.03
99-2441-21-03