binder LEITUNG 2m PUR 8x0,25 KABELDOSE

product number: 79 9258 020 08

  • Manufacturer: binder
Picture may vary

Description:
Snap-In Female cable connector, Contacts: 8, unshielded, moulded on the cable, IP67, PUR, black, 8 x 0.25 mm², 2 m
in stock: 0 pieces

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 620
Area (short) Snap-In IP67
Connector design Female cable connector
Connector locking system snap-in
Mounting type Cable mounting
Bereich Subminiature Connectors
Cable length 2 m
Termination moulded on the cable

Electrical parameters

Rated voltage (V) 63 V
Rated current (40 °C) 1.0 A
Insulation resistance ≥ 1010 Ω
Contact resistance ≤ 3 mΩ
Insulating material group II
Overvoltage category II
Pollution degree 2
EMC compliance unshielded

Material characteristics

Housing material PUR
Contact material CuSn (bronze)
Contact body material PA (UL94 V-0)
Sheath material PUR
Single-lead insulation PP
RoHS value (Pb)
RoHS description Blei
SCIP number 7a941c15-bf65-4ace-a7e2-18306ee5f7d2
SVHC description Lead
SVHC value CAS 7439-92-1
Sheath color black
Halogen free no

Technical characteristics

Cable diameter 6.0 mm
Cross-sectional area 8 x 0.25 mm²
Bending radius, moving cable ≥ 10 x ⌀
Bending radius, fixed cable ≥ 5 x ⌀
Cross-sectional area (AWG) AWG 24
Cross-sectional area (mm) 0.25 mm²
Degree of protection IP67
min. temperature range cable fixed (°C) -50 °C
max. temperature range cable fixed (°C) 80 °C
min. temperature range cable in move (°C) -25 °C
max. temperature range cable in move (°C) 80 °C
Travel speed at 5 m horizontal path -> 200 m/min

Other

Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th
customs tariff number 85444290
Aliases 79925802008
79.9258.020.08
79-9258-020-08

Downloads