binder M12-A FLANSCHSTECKER

product number: 99 0431 500 04

Manufacturer: binder

Picture may vary

Description:
M12 Male panel mount connector, Contacts: 4, unshielded, screw clamp, IP67, UL, M20x1.5, for the power supply

From 1 pieces	per EUR 8,27
From 20 pieces	per EUR 6,90
From 40 pieces	per EUR 5,91
From 100 pieces	per EUR 5,32

in stock: 0 pieces

Single price: EUR 5,32 - EUR 8,27 per pieces

Total price:

EUR 5,32 - EUR 8,27

, excl. shipping costs

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series	series 713
Area (short)	M12-A
Connector design	Male panel mount connector
Connector locking system	screw
Bereich	Automation Technology - Sensors and Actuators
Termination	screw clamp

Electrical parameters

Rated voltage (V)	250 V
Rated current (40 °C)	8.0 A
Insulation resistance	> 10⁸ Ω
Contact resistance	≤ 3 mΩ
Insulating material group	II
Overvoltage category	II
Pollution degree	3
EMC compliance	unshielded

Material characteristics

Housing material	Zinc die-cast nickel-plated
Contact material	CuZn (brass)
Contact body material	PA
Locking material	Zinc die-cast nickel-plated
RoHS value	(Pb)
RoHS description	Blei
SCIP number	1b26d419-9f03-4719-8d69-19a264f3a9c3
SVHC description	Lead
SVHC value	CAS 7439-92-1

Technical characteristics

Cross-sectional area (AWG)	AWG 16
Cross-sectional area (mm)	max. 1.50 mm²
Degree of protection	IP67

Other

Approval 1	UL
Security notice 1	The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 10	The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Security notice 2	The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3	To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con
Security notice 4	Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5	The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6	Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th
Security notice 7	The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Security notice 8	To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).
customs tariff number	85369010
Aliases	99043150004 99.0431.500.04 99-0431-500-04

Downloads

Product data sheet

3D object