binder LEITUNG 2m PUR 8x0,25 KABELSTECKER
product number: 79 9257 020 08
Picture may vary
Description:
Snap-In Male cable connector, Contacts: 8, unshielded, moulded on the cable, IP67, PUR, black, 8 x 0.25 mm², 2 m
Snap-In Male cable connector, Contacts: 8, unshielded, moulded on the cable, IP67, PUR, black, 8 x 0.25 mm², 2 m
Quantity exceeded the max. order quantity (max. 50.000)
General parameters
Series | series 620 |
Area (short) | Snap-In IP67 |
Connector design | Male cable connector |
Connector locking system | snap-in |
Mounting type | Cable mounting |
Bereich | Subminiature Connectors |
Cable length | 2 m |
Termination | moulded on the cable |
Electrical parameters
Rated voltage (V) | 63 V |
Rated current (40 °C) | 1.0 A |
Insulation resistance | ≥ 1010 Ω |
Contact resistance | ≤ 3 mΩ |
Insulating material group | II |
Overvoltage category | II |
Pollution degree | 2 |
EMC compliance | unshielded |
Material characteristics
Housing material | PUR |
Contact material | CuZn (brass) |
Contact body material | PA (UL94 V-0) |
Sheath material | PUR |
Single-lead insulation | PP |
RoHS value | (Pb) |
RoHS description | Blei |
SCIP number | 206f47d4-7b84-4683-8ca7-31a0c60eda75 |
SVHC description | Lead |
SVHC value | CAS 7439-92-1 |
Sheath color | black |
Halogen free | no |
Technical characteristics
Cable diameter | 6.0 mm |
Cross-sectional area | 8 x 0.25 mm² |
Bending radius, moving cable | ≥ 10 x ⌀ |
Bending radius, fixed cable | ≥ 5 x ⌀ |
Cross-sectional area (AWG) | AWG 24 |
Cross-sectional area (mm) | 0.25 mm² |
Degree of protection | IP67 |
min. temperature range cable fixed (°C) | -50 °C |
max. temperature range cable fixed (°C) | 80 °C |
min. temperature range cable in move (°C) | -25 °C |
max. temperature range cable in move (°C) | 80 °C |
Travel speed | at 5 m horizontal path -> 200 m/min |
Other
Security notice 1 | The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. |
Security notice 2 | The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. |
Security notice 3 | To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con |
Security notice 4 | Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. |
Security notice 6 | Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th |
customs tariff number | 85444290 |
Aliases |
79925702008 79.9257.020.08 79-9257-020-08 |
Downloads
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.