02166 5508-0
kontakt@evg.de
EVG FLANSCHSTECKER 200mm LITZE
product number: 010719-905003/000000-0200
Picture may vary
| From 1 pieces | per EUR 8,42 |
| From 20 pieces | per EUR 6,97 |
| From 50 pieces | per EUR 6,34 |
| From 100 pieces | per EUR 6,04 |
in stock: 0 pieces
EUR
8.42
Single price: EUR 6,04 - EUR 8,42 per pieces
Total price:
EUR 6,04 - EUR 8,42
Quantity exceeded the max. order quantity (max. 50.000)
General parameters
| Series | Series 719 |
| Series designation | Snap-In Steckverbinder IP40 |
| Area (short) | Snap-In IP40 |
| Connector design | Male panel mount connectors |
| Number of poles | 5-polig |
| Connector locking system | snap-in |
| Locking system | Schnappverriegelung |
| Bereich | Snap-In Connectors |
| Cable length | 2 m |
| Connection type | Litzen |
| Termination | solder |
Electrical parameters
| Rated voltage (V) | 60 V |
| Voltage | 60 V |
| Rated Current (30 °C) | 2 A |
| Max. operating current (30 °C) | 3 A |
| Insulation resistance | ≥ 1010 Ω |
| Overvoltage category | II |
| Pollution degree | 1 |
| EMC compliance | unshielded |
Material characteristics
| Housing material | PA |
| Housing material | PA |
| Contact material | CuZn (brass) |
| Contact body material | PA |
| RoHS value | (Pb) |
| RoHS description | Blei |
| SCIP number | 8544c879-b827-4547-bc51-944512e858bf |
| SVHC description | Lead |
| SVHC value | CAS 7439-92-1 |
Technical characteristics
| Cross-sectional area (AWG) | AWG 24 |
| Cross-sectional area (mm) | 0.25 mm² |
| Degree of protection | IP40 |
| Degree of protection (IP) | IP40 |
Other
| Approval 1 | UL |
| Security notice 1 | The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. |
| Security notice 2 | The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in |
| Security notice 3 | To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with volta |
| Security notice 4 | Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into acc |
| Security notice 6 | Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further inform |
| customs tariff number | 85369010 |
| Aliases |
0107199050030000000200 010719.905003.000000.0200 010719-905003-000000-0200 107199050030000000200 |
Downloads
Customers also purchased
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.
Last viewed
