binder M12-A FLANSCHDOSE

product number: 09 0432 487 04

Manufacturer: binder

Picture may vary

Description:
Female panel mount connector, Contacts: 4, unshielded, THT, IP67, PG 9, front fastened

From 1 pieces	per EUR 4,83
From 20 pieces	per EUR 4,03
From 40 pieces	per EUR 3,45
From 100 pieces	per EUR 3,11

in stock: 0 pieces

Single price: EUR 3,11 - EUR 4,83 per pieces

Total price:

EUR 3,11 - EUR 4,83

, excl. shipping costs

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series	series 713
Series designation	M12 Steckverbinder A-Kodierung
Area (short)	M12-A
Connector design	Female panel mount connector
Number of poles	4-polig
Connector locking system	screw
Locking system	Schraubverriegelung nach DIN EN 61076-2-101
Mounting type	Housing assembly
Bereich	Automation Technology - Sensors and Actuators
Connection type	tauchlöten
Termination	THT

Electrical parameters

Rated voltage (V)	60 V
Voltage	250 V
Rated current (40 °C)	4.0 A
Rated current (40 °C)	4 A
Insulation resistance	> 10⁸ Ω
Contact resistance	≤ 3 mΩ
Insulating material group	III
Overvoltage category	II
Pollution degree	3
EMC compliance	unshielded

Material characteristics

Housing material	PA
Housing material	PA
Contact material	CuZn (brass)
Contact body material	PA
Locking material	CuZn (brass)
RoHS value	(Pb)
RoHS description	Blei
SCIP number	42cd9799-3c68-4312-8e4f-f57ae0c6d8f2
SVHC description	Lead
SVHC value	CAS 7439-92-1

Technical characteristics

Degree of protection	IP67
Degree of protection (IP)	IP67

Other

Security notice 1	The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 10	The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Security notice 2	The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3	To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con
Security notice 4	Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5	The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6	Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th
Security notice 7	The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Security notice 8	To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 125 cNm).
customs tariff number	85369010
Security notice 9	The protection class specification applies on condition that the four mounting holes are made as blind holes.
Aliases	09043248704 09.0432.487.04 09-0432-487-04 9043248704

Downloads

Product data sheet

3D object

This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.

Products

Product categories and contents are regularly broadened.