02166 5508-0
kontakt@evg.de
binder KABELSTECKER
product number: 99 0213 44 07
Picture may vary
Description:
RD24 Male cable connector, Contacts: 6+PE, 6.0-9.0 mm, unshielded, solder, IP67, PG 9
RD24 Male cable connector, Contacts: 6+PE, 6.0-9.0 mm, unshielded, solder, IP67, PG 9
Quantity exceeded the max. order quantity (max. 50.000)
General parameters
| Series | series 692 |
| Area (short) | RD24 |
| Connector design | Male cable connector |
| Number of contacts | 6+PE |
| Connector locking system | screw |
| Locking system | RD24 |
| Mounting type | Cable mounting |
| Bereich | Power Connectors |
| Termination | solder |
Electrical parameters
| Rated voltage (V) | 250 V |
| Rated current (40 °C) | 10.0 A |
| Insulation resistance | ≥ 1010 Ω |
| Contact resistance | ≤ 5 mΩ |
| Insulating material group | III |
| Overvoltage category | III |
| Pollution degree | 3 |
| EMC | unshielded |
| EMC compliance | unshielded |
Material characteristics
| Contact material | CuZn (brass) |
| Contact body material | PBT (UL94 V-0) |
| Contact plating | Ag (silver) |
| RoHS value | (Pb) |
| RoHS description | Lead |
| SCIP number | ec53c568-58a2-4aaa-912b-34f51703493e |
| SVHC description | Imidazolidine-2-thione,Lead |
| SVHC value | CAS 96-45-7,CAS 7439-92-1 |
Technical characteristics
| Cable outlet | 6.0-9.0 mm |
| Cross-sectional area (AWG) | AWG 18 |
| Cross-sectional area (mm) | max. 0.75 mm² |
| Degree of protection | IP67 |
| Degree of protection 2 | IP65 with cable diameter 6-7 mm |
Other
| Security notice 1 | The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. |
| Security notice 2 | The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. |
| Security notice 3 | To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con |
| Security notice 4 | Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. |
| Security notice 6 | Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th |
| Security notice 8 | To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm). |
| customs tariff number | 85369010 |
| Aliases |
9902134407 99.0213.44.07 99-0213-44-07 |
Downloads
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.
Last viewed
RD24 Male cable connector, Contacts: 6+PE, 6.0-9.0 mm, unshielded, solder, IP67, PG 9
