binder M12-B WINKELDOSE

product number: 99 0436 165 05

  • Manufacturer: binder
Picture may vary

Description:
M12 Female angled connector, Contacts: 5, 6.0-8.0 mm, unshielded, screw clamp, IP67, UL
From 1 pieces per EUR 15,48
From 20 pieces per EUR 12,53
From 40 pieces per EUR 10,69
From 100 pieces per EUR 9,95
in stock: 0 pieces
Single price: EUR 9,95 - EUR 15,48 per pieces
Total price:

EUR 9,95 - EUR 15,48

Quantity exceeded the max. order quantity (max. 50.000)

General parameters

Series series 715
Area (short) M12-B
Connector design Female angled connector
Connector locking system screw
Mounting type Cable mounting
Bereich Automation Technology - Data Transmission
Termination screw clamp

Electrical parameters

Rated voltage (V) 60 V
Rated current (40 °C) 4.0 A
Insulation resistance ≥ 1010 Ω
Contact resistance ≤ 8 mΩ
Insulating material group III
Overvoltage category II
Pollution degree 3
EMC compliance unshielded

Material characteristics

Housing material PA
Contact material CuSn (bronze)
Contact body material PA
Locking material PA
RoHS value (Pb)
RoHS description Blei
SCIP number a8543542-ccfe-4123-a16e-bc2d4ab2f598
SVHC description Imidazolidine-2-thione, Lead
SVHC value CAS 96-45-7, CAS 7439-92-1

Technical characteristics

Cable outlet 6.0-8.0 mm
Cross-sectional area (AWG) AWG 18
Cross-sectional area (mm) 0.75 mm²
Degree of protection IP67

Other

Approval 1 UL
Security notice 1 The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
Security notice 10 The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected. In addition, the user must ensure that the cable is suitably secured.
Security notice 2 The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Security notice 3 To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con
Security notice 4 Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Security notice 5 The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Security notice 6 Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th
Security notice 7 The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Security notice 8 To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
customs tariff number 85369010
Aliases 99043616505
99.0436.165.05
99-0436-165-05