binder KABELDOSE
product number: 99 0700 37 05
Picture may vary
Description:
M12 Female cable connector, Contacts: 4+PE, 8.0-13.0 mm, unshielded, screw clamp, IP67, UL 2237 in preparation, with PE connection
M12 Female cable connector, Contacts: 4+PE, 8.0-13.0 mm, unshielded, screw clamp, IP67, UL 2237 in preparation, with PE connection
From 1 pieces | per EUR 20,68 |
From 20 pieces | per EUR 18,10 |
From 40 pieces | per EUR 16,03 |
From 100 pieces | per EUR 14,48 |
in stock: 0 pieces
EUR
20.68
Single price: EUR 14,48 - EUR 20,68 per pieces
Total price:
EUR 14,48 - EUR 20,68
Quantity exceeded the max. order quantity (max. 50.000)
General parameters
Series | series 824 |
Area (short) | M12-K |
Connector design | Female cable connector |
Connector locking system | screw |
Mounting type | Cable mounting |
Bereich | Automation Technology - Voltage and Power Supply |
Termination | screw clamp |
Electrical parameters
Rated voltage (V) | 630 V |
Rated current (40 °C) | 12.0 A |
Insulation resistance | > 1010 Ω |
Contact resistance | ≤ 5 mΩ |
Insulating material group | I |
Overvoltage category | III |
Pollution degree | 3 |
EMC compliance | unshielded |
Material characteristics
Housing material | PA |
Contact material | CuZn (brass) |
Contact body material | PA (UL94 V-0) |
RoHS value | (Pb) |
RoHS description | Blei |
SCIP number | 2e2cebc2-9798-4e45-83db-3f5ba1376ca9 |
SVHC description | Lead |
SVHC value | CAS 7439-92-1 |
Technical characteristics
Cable outlet | 8.0-13.0 mm |
Cross-sectional area (AWG) | AWG 16 with wire-end ferrule / AWG 14 without wire-end ferrule |
Cross-sectional area (mm) | max. 1.50 mm² with ferrule / max. 2.50 mm² without ferrule |
Degree of protection | IP67 |
Other
Security notice 1 | The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. |
Security notice 11 | In the case of cable connectors with a metal threaded ring, it is imperative to ensure a connection with the PE protective contact of the appliance connector. Connecting cables between appliance connectors that are not connected to the PE contact are not |
Security notice 2 | The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. |
Security notice 3 | To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con |
Security notice 4 | Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. |
Security notice 5 | The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected. |
Security notice 6 | Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th |
Security notice 8 | To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm). |
customs tariff number | 85369010 |
Aliases |
9907003705 99.0700.37.05 99-0700-37-05 |
Downloads
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.