binder M12-A WINKELSTECKER EMV FÜR 6-8MM KÄFIGZUGFEDER
product number: 99 1525 822 04
Picture may vary
Description:
M12 Male angled connector, Contacts: 4, 6.0-8.0 mm, shieldable, wire clamp, IP67
M12 Male angled connector, Contacts: 4, 6.0-8.0 mm, shieldable, wire clamp, IP67
From 1 pieces | per EUR 19,70 |
From 20 pieces | per EUR 15,95 |
From 40 pieces | per EUR 14,07 |
From 100 pieces | per EUR 12,66 |
in stock: 0 pieces
EUR
19.70
Single price: EUR 12,66 - EUR 19,70 per pieces
Total price:
EUR 12,66 - EUR 19,70
Quantity exceeded the max. order quantity (max. 50.000)
General parameters
Series | series 713 |
Area (short) | M12-A |
Connector design | Male angled connector |
Connector locking system | screw |
Mounting type | Cable mounting |
Bereich | Automation Technology - Sensors and Actuators |
Termination | wire clamp |
Electrical parameters
Rated voltage (V) | 250 V |
Rated current (40 °C) | 4.0 A |
Insulation resistance | > 108 Ω |
Contact resistance | ≤ 3 mΩ |
Insulating material group | III |
Overvoltage category | II |
Pollution degree | 3 |
EMC compliance | shieldable |
Material characteristics
Housing material | Zinc die-cast nickel-plated |
Contact material | CuZn (brass) |
Contact body material | PA |
Locking material | Zinc die-cast nickel-plated |
RoHS value | (Pb) |
RoHS description | Blei |
SCIP number | 08a06e76-6af3-4286-9ffd-a26c6dfe338a |
SVHC description | Imidazolidine-2-thione, Lead |
SVHC value | CAS 96-45-7, CAS 7439-92-1 |
Technical characteristics
Cable outlet | 6.0-8.0 mm |
Cross-sectional area (AWG) | AWG 20 |
Cross-sectional area (mm) | max. 0.50 mm² |
Degree of protection | IP67 |
Other
Security notice 1 | The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. |
Security notice 2 | The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. |
Security notice 3 | To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to con |
Security notice 4 | Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. |
Security notice 6 | Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to th |
Security notice 8 | To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm). |
customs tariff number | 85369010 |
Aliases |
99152582204 99.1525.822.04 99-1525-822-04 |
Downloads
This offer is aimed exclusively at companies (§ 14 BGB), legal entities under public law or special funds under public law. Consumers according to § 13 BGB are excluded from the use of the EVG shop.